Full automatic FC wristwatch pad printing line

Products > Precision machining industry application > Full automatic FC wristwatch pad printing line

Full automatic FC wristwatch pad printing line

Product introduction:
This equipment is mainly used for pad printing of small products such as watches FC and BC

Product advantages:

1. This line is a full-automatic FC pad printing line, and the product dividing, feeding, pad printing, loading and closing are automatically completed by the equipment;

2. The whole line adopts linear pad printing scheme, which can realize single machine operation, multi machine connection operation and pad printing baking connection operation according to customer requirements.

3. Ab plane double station independent operation, high-precision image alignment system equipped with high-precision XY θ The slide table ensures the accuracy of alignment, can automatically detect the angle of the product, can automatically adjust and correct its position and angle, etc., and carry out alignment pad printing after correction;

4. The front and back of the automatic ink wiping mechanism are driven by motors to control the width and position of the tape. The ink can be wiped at multiple points to make full use of the tape, reduce waste and save costs;

5. The air blowing mechanism of the machine can be adjusted at any position near both sides of the rubber head. The air blowing function is an automatic hot air circulation filter system;

6. The position of the rubber head is adjusted by a precision adjustment slide, equipped with an automatic oil return function;

Product specification:

Equipment model:

NF-SBYY-07A

Pad printing steel plate size

250x 100x10mm (fixed value)

Minimum product size

L x W=15x15mm—45 x 45 mm

Overall printing dimensional accuracy of the production line

±0.03mm

Action cycle

8.8s/pcs (UPH depends on product process requirements)

Glass alignment mode

CCDCounterpoint

Height of platen from the ground

750±20mm

Platform flatness

0.03mm

Equipment protection

Closed protective cover / door magnet / grounding / emergency switch / alarm lamp

Oil cup size

90mm

Equipment air source

0.4 ~ 0.7MPa, dry air source, and stable air source is required

Printing speed

0-800mm / s digital adjustment

Equipment power supply

AC220V/50HZ

Maximum printing range

45X45mm

设备功率

8kW

Tray size

Length * width = 393 * 312mm ± 20mm


Sitemap